From the creator of SpiritVox, Echovox and Spirit Voice comes a new paranormal investigation tool. SpiriTrap is a sensor based application which uses your devices Magnetometer and Accelerometer sensors available on most devices. If your device does not have the required sensor it will not be available.
The idea is simple, use SpiriTrap in a doorway, room or hallway to detect footsteps or EMF fluctuations. It can also be used as an interaction device as the sensors are set to be VERY sensitive and it should be easily triggered by an energy source.
2 Modes, Silent and Alarm. Silent mode is just that, silent, no alarm will sound and it will monitor the area and write changes to a .txt log file with a time/date stamp. This means you can monitor an area for fluctuations for a long period of time unmanned.
When set to alarm mode an alarm will sound when the device is triggered. Again, think of all the uses for that.
UPON PRESSING "ARM" YOU HAVE 5 SECONDS TO LEAVE THE AREA.
This is a simple program for serious investigators. A great way to cover a hall, or use the time stamps to back up other evidence such as MEL spikes, footsteps etc.
I am planning adding more sensors such as static, light, and sound monitoring/auto record in version 2 when it's ready.
PLEASE NOTE: YOU MUST HAVE AT LEAST 1 OF THE 2 SENSORS MENTIONED ABOVE FOR THIS TO FUNCTION. MOST DEVICES HAVE AT LEAST 1.
ALSO: The sensors are VERY sensitive if you run into trouble with alarms tripping to easily please contact me atspiritvox@bigbeardaudio.comThis is a new idea and it will be growing as development and user feedback continue.
I fully support all my apps and am easy to reach. FOLLOW ME ON TWITTER: www.twitter.com/spiritvoxapp THAT IS THE BEST WAY TO REACH ME FOR SUPPORT.
I am a paranormal researcher, this is my life. I build these tools so we can find ANSWERS.
See my ghost hunting adventures at www.youtube.com/bigbeardaudio and my blog: spiritvox.bigbeardaudio.com
DEMO VIDEO IN PRODUCTION.SpiritVox의 창조자에서 Echovox과 성령의 음성은 새로운 초자연적 인 조사 도구를 제공합니다. SpiriTrap는 장치 Magnetometer 및 대부분의 기기에서 사용할 수 가속도계 센서를 사용하여 센서 기반 응용 프로그램입니다. 장치가 필요한 센서가없는 경우는 사용할 수 없습니다.
아이디어는 간단하다, 발자취 나 EMF 변동을 감지하는 문, 방 또는 복도에 SpiriTrap를 사용합니다. 센서는 매우 민감로 설정되어 있으며 쉽게 에너지 원에 의해 실행되어야한다로 또한 상호 작용 장치로 사용할 수 있습니다.
이 모드, 침묵 알람. 자동 모드는 자동, 경보는 소리하지 않습니다하고 지역을 모니터링하고 시간 / 날짜 스탬프에. txt 로그 파일에 변경 사항을 작성 불과 있다는 것입니다. 이는 무인 오랜 기간 동안 변동에 대한 영역을 모니터링 할 수 있습니다.
장치가 트리거 될 때 모드를 알리고 설정하면 알람이 소리 것입니다. 다시 말하지만, 거기에 모든 용도의 생각합니다.
"ARM"을 누르면 즉시 귀하는이 지역에서 물러나 5 초를 사용하고 있습니다.
이 심각한 조사하기위한 간단한 프로그램입니다. 홀 커버, 또는 멜 스파이크와 같은 다른 증거를 백업하는 타임 스탬프를 사용하는 가장 좋은 방법, 발자취 등
나는 준비가되면 이러한 정적, 빛, 및 사운드 모니터링 / 버전 2에 자동 기록 등 더 많은 센서를 추가 계획입니다.
참고 :이 함수에이 위에서 언급 한 두 센서의 최소 1가 있어야합니다. 대부분의 장치는 적어도 1 있습니다.
또한 : 당신이 문제로 실행하는 경우 센서는 매우 민감 쉽게 즐겁게하는 일인가 알람은spiritvox@bigbeardaudio.com로 연락
이 새로운 아이디어 개발 및 사용자 피드백이 계속으로는 성장합니다.
나는 완전히 모든 응용 프로그램을 지원하고 도달하기 쉬운입니다. 트위터에서 ME를 따르십시오 : www.twitter.com / spiritvoxapp 그 지원을 저에게 연락 할 수있는 가장 좋은 방법입니다.
나는 초자연적 인 연구이다, 내 인생입니다. 우리가 답변을 찾을 수 있도록이 도구를 구축 할 수 있습니다.
spiritvox.bigbeardaudio.com : / bigbeardaudio 내 블로그 www.youtube.com시에 유령 사냥 모험을 참조하십시오
생산 데모 비디오.